泰亚旗下公司
Language
Chinese
English
CN / EN
MENU

TDS

Knowledge Center Popular Science Application Research Selection Suggestions FAQ Download Materials

Download Materials

  • TMS-1101-T One-part dealcoholized flame-retardant silicone adhesiv TDS
    One-part dealcoholized flame-retardant silicone adhesive, UL 94 V-0, thermal-shock resistant from −50 to 250°C (−58 to 482°F), bonding metals and plastics for PSU and component sealing.
  • SGT-200 Two-part 1:1 silicone potting compound TDS
    Two-part 1:1 silicone potting compound, 2.0 W/(m·K) — free-flowing, anti-settling, UL 94 V-0, RoHS — for power modules, EV chargers, and automotive DC-DC units.
  • TMS-1220WH One-part RTV thermally conductive sealant TDS
    One-part RTV thermally conductive sealant, 1.5–2.0 W/(m·K), tack-free in 5–10 min, non-slumping paste — for EV chargers, battery BMS, and telecom power.
  • TMS-1215WH One-part RTV silicone sealant TDS
    One-part RTV silicone sealant, 1.0–1.5 W/(m·K), with strong adhesion to metals and plastics and thermal-shock resistance for EV electronics and telecom sealing.
  • SI-TN4030 Single-component silicone thermal gel TDS
    Single-component silicone thermal gel, 4.0 W/(m·K) at 0.25 °C·cm²/W — no mixing, no curing, low stress, reworkable — for automotive ECUs, power modules, and processor cooling.
  • MS-TY1730 Non-curing, self-healing one-part sealant TDS
    Non-curing, self-healing one-part sealant that reseals after repeated disassembly — waterproof, V-0 rated, RoHS/REACH — for battery-pack enclosures, gap sealing, and insulation fill.
  • NS-TN4030 Silicone-free thermal gel TDS
    Silicone-free thermal gel, 4.0 W/(m·K) at 0.18 °C·cm²/W — zero volatile siloxanes, solder-compatible and paintable — for ECUs, memory, and processor cooling.
  • TAS-3001 UV + moisture dual-cure adhesive TDS
    UV + moisture dual-cure adhesive — cures in 5–10 s under UV, shadow areas in 48 h — transparent and strong (18 MPa tensile) for component bonding and board-level protection.
  • TYC-320U High-hardness CR rubber foam TDS
    High-hardness CR foam, 45 Shore C / 220 kPa, with the series' best strength (1000 kPa tensile, > 5 N/mm tear) — for heavy-duty, load-bearing seals.
  • TYC-300U High-hardness CR rubber foam TDS
    The firmest CR foam at 48 Shore C, delivering 200 kPa support — maximum rigidity in the series for heavy-load sealing and structural padding.
  • TYC-240U High-hardness CR rubber foam TDS
    High-hardness CR foam, 35 Shore C / 170 kPa, holds shape under load with heat shrinkage ≤5% — for load-bearing seals and equipment mounting pads.
Service Hotline
Follow Us
Video

Sitemap|Contacts

粤ICP备2020116610号

Copyright © 2026 Dongguan Taiya Electronics Technology Co., Ltd.

Subsidiary company: Dongguan Taiya Electronics Technology Co., Ltd. DSIC Technology (Dongguan) Co., Ltd Zhuzhou Taixin Electronic Technology Co., Ltd Dongguan Guangmai Electronic Technology Co., Ltd Dongguan guangya New Materials Co., Ltd

Email

vip@taiya.cn

Follow Us

关注视频号